Most Break-ins Start at One PC
Most of the break-ins I clean up started at a single computer: a scam call, a fake “verify you are human” page, or a remote-control program somebody installed two years ago and forgot about. Workstation security is the least glamorous part of IT, and scam cleanup is now one of the most common calls I get.
I’ve been pulling apart infected Windows machines since 2006, from the TDSS rootkits of that era to today’s scam tools, and I’m CompTIA Security+ certified. This page covers the three parts of the job: finding out what’s already on a machine, hardening it so the usual tricks fail, and, when something has already gotten in, working out exactly what happened and putting it in writing. It applies to a single home PC or every desk in an office.
What My Audit Covers
A security audit from me is hands-on. I go through each machine myself, with S-Ray and the same tools I use for scam and malware recovery, and look at the things that actually decide whether a PC is safe:
What I check on every workstation
Plus what one summer of service turned up
Protection
- Defender actually on: real-time and tamper protection, current signatures
- Scan exclusions nobody can explain
- Leftover or expired security suites
- Windows, driver, and firmware updates
Access
- Remote-control software, including copies hidden as services
- Sign-in components at the lock screen
- Accounts, admin rights, and the Guest account
- Startup items, scheduled tasks, and services
Exposure
- Browser extensions and notification permissions
- Hosts-file and proxy tampering
- BitLocker status, and whether you have the recovery key
- A backup that actually runs
Late June to late September 2026, 56 computers came through for a tune-up or disinfection:
8 of 56had remote-control software the owner never authorized
3were still connected to an outside server when they arrived
12had a security suite that had pushed Defender aside
Every item gets a risk level in that machine’s written findings. ScreenConnect was the remote tool on seven of the eight.
About the third-party AV stuff: on 12 of those machines, one of these had pushed Microsoft Defender aside, and an antivirus that sidelines Defender is how the year-old backdoor in the October case below went unflagged.
New doesn’t mean safe, either. A batch of fifteen identical business desktops I set up came out of the box with HP’s factory security suite and Windows Defender signatures more than 400 days stale. The AV definitions typically resolve themselves along with the rest of the Windows Update tasks after the conflicting software is removed, but application and driver vulnerabilities often do not (or lag considerably).
Each machine gets its own written findings with a risk level for every item. If fraud or compromise is involved, you also get documentation suitable for your bank or law enforcement.
Hardening With the Triple-S Customer Panel
Every machine I service leaves with the Triple-S Customer Panel, my own security software, free to every client with no subscription. It sets browser security policy at one of four levels (Standard, Enhanced, Maximum, or Family), adds DNS-level filtering on desktops, and blocks the remote-control tools scammers talk people into installing. It doesn’t sit in the background using resources; it works through protections Windows already has, and I can raise or lower its level to fit how you use the machine.
Laptops are the one exception on DNS filtering, on purpose: they move between networks, and filtered DNS tends to break the sign-in pages on hotel and airport Wi-Fi.
The newest piece, Remote Access Guard, goes on machines that don’t need remote-access tools. If one of those programs gets installed anyway, it shuts it down within seconds and tells you in plain English what it stopped and why, and if it ever blocks something you actually wanted, it can put things back exactly as they were.
Triple-S Sentry, Off Until You Turn It On
Sentry is my monitoring tool. Once you switch it on, your PC spends a few seconds each morning reporting drive status, stability, and security posture, so I can get ahead of a problem and call you before it turns into a failure. It’s never on by default: I stage it with every service, one click turns it on the first time you open the Customer Panel, and one more turns it off. There’s no extra charge either way.
When Something Already Got In
Once a scammer has been on a machine, or something on it is talking to a server it shouldn’t, the job becomes an investigation. I collect the evidence with S-Ray, get a second opinion from FRST, and sort what’s confirmed from what’s only probable before I change anything. Every step that deletes or disables something waits for my approval, and I clean in place. Reinstalling Windows is rarely necessary: over that summer, exactly 1 of the 56 machines needed it, and that was a BitLocker-locked drive with no recovery key.
I don’t call a machine clean until it has a clean FRST log and a full offline scan on top of the cleanup. Then you get the story in writing: what got in, how and when, what it could reach, and what I took out. For the deeper cases, I take apart what was planted and build a full infiltration timeline, delivered as a finished written report. (More on how I handle that side in my FAQ.)
One scam call, two PCs, three intrusions
October 2026, times from the logs
- Apr 25, 4:21 PMA fake “verify you are human” page talks someone into running a command on the all-in-one.
- Apr 25, 4:32 PMNetSupport Manager, a remote-control program, is installed and connected to an outside server. It stays connected for about six months, alongside a year-old backdoor that went unflagged because the installed antivirus had sidelined Defender.
- Oct 22, 4:45 PMDuring a scam call, RemotePC goes onto the laptop as a hidden service, with a sign-in component at the lock screen.
- Oct 26, 1:25 PMS-Ray collects from both machines, three minutes apart. Within about six minutes, both reports read OVERALL RISK: CRITICAL.
- 1:35 PMAll-in-one contained: the attacker’s connection verified gone.
- 1:47 PMLaptop contained: a revised removal script with 16 verification checks ran at 1:41, and the installers were quarantined by 1:47.
- Oct 28Follow-up collection on both machines: risk down from CRITICAL to NOTICE.
22 minutes from the first collection to the last installer quarantined
Every removal step only executed after my explicit approval, and the report separates what I confirmed from what’s only probable. The whole job, two machines start to finish, came to $694.
I wrote up the whole case, with every technical indicator, on my blog. Something minor you might notice: FRST caught the lock-screen component S-Ray missed, which is exactly why I run both. S-Ray learned to catch it the same afternoon.
Also important though: cleaning a PC doesn’t un-steal a password. If an account was compromised, I’ll tell you which ones matter most and how to lock them down: two-factor authentication and passkeys first, starting with email and banking, then a password manager so every password is different.
For Offices
For an office, I audit every workstation the same way and give you findings per machine, so you can see which ones need attention first. New machines get hardened before they ever reach a desk (more on that under small business IT), and remote sessions run on TeamViewer Corporate.
Rates
- Diagnosis and consultation: free
- In-lab work: $148/hr
- Remote support: $176/hr, billed by the minute, $50 minimum
- On-site service: $196/hr for homes, $224/hr for businesses, billed in 15-minute increments, $250 minimum
- Malware removal and scam recovery: averages $250–$325 in-lab, disinfection plus a full tune-up
- Triple-S Customer Panel and Sentry: free for clients
Workstation Security Questions
Can you tell whether a scammer still has access to my computer?
Usually, yes. S-Ray and FRST together show remote-control software (including copies hiding as services), sign-in components at the lock screen, and live connections to outside servers. In the October case on this page, I verified the attacker’s connection was gone within ten minutes of starting work.
Do I need to reinstall Windows after a scam or infection?
Rarely. I clean in place, and I don’t call a machine clean until it has a clean FRST log and a full offline scan on top of the cleanup. Of the 56 machines I tuned up or disinfected over the summer of 2026, exactly one needed a reinstall, and that was a BitLocker-locked drive with no recovery key.
What does the Triple-S Customer Panel cost?
Nothing. It’s free for every client, it goes on every machine I service, and there’s no subscription.
Is Triple-S Sentry always watching my computer?
No. It’s off until you switch it on, with one click the first time you open the Customer Panel, and one more click turns it off. When it’s on, it runs for a few seconds each morning and reports drive status, stability, and security posture.
Can you secure all the PCs in our office?
Yes. I audit each one, and you get written findings per machine with a risk level for every item. On-site business work is $224/hr, remote work is $176/hr, and in-lab work is $148/hr.
Will I get a written report?
Yes. In-lab work gets a full Service Report, remote work gets an S-Ray System Health Report, and investigations get a written timeline of what happened. If fraud is involved, the documentation is suitable for your bank or law enforcement.
The person who picks up at (502) 233-4393 is the one who would actually do the work, and the first conversation costs nothing.